Setting up Voice on your TP-Link Archer VR1600v

Shortly before the connection of your internet services, we will send you a text message with the voice configuration details for your TP-Link. These are specific to you so don't share them with anyone.

Go to your internet browser and visit http://tplinkmodem.net or 192.168.1.1.


The default username and password for the router is admin.

GIF_TPLink_Login.gif

Once you are in the settings, go to Telephony > Telephone Numbers and then Click Add.

GIF_TPLink_VOIP_ADD.gif

Enter the provided phone number (in 64 format) into the Phone Number section.

Enter sip.myrepublic.co.nz into the Register Address field.

Enter the provided phone number (in 64 format) into the Authentication ID section.

Finally, enter the provided SIP password into the Password field.

 

Click Advanced

Enter sip.myrepublic.co.nz into both SIP Proxy and Outbound Proxy fields.

 

Click Save

 

The status of the new phone line should become a blue tick.

Simply plug your phone into the Phone 1 port on the back of the router and you're good to go!

Was this article helpful?
4 out of 8 found this helpful